Math Is Fun Forum
  Discussion about math, puzzles, games and fun.   Useful symbols: √ ∞ ≠ ≤ ≥ ≈ ⇒ ∈ Δ θ ∴ ∑ ∫ π -




Not registered yet?

Post a reply

Go back

Write your message and submit
:) :| :( :D :o ;) :/ :P :lol: :mad: :rolleyes: :cool: | :dizzy :eek :kiss :roflol :rolleyes :shame :down :up :touched :sleep :wave :swear :tongue :what :faint :dunno

Go back

Topic review (newest first)

2013-05-03 19:33:10


Practical solutions are done with numbers. All the other kaboobly doo called mathematics is not.
You have given me no data to work with. I am as powerless as a shark in the desert. A picture is worth a thousand words and a table of numbers is worth 1000 pictures.

Do you have actual measurements?

2013-05-03 14:35:39


I will explain the actual problem.
I am sensing liquid level whose measured value is affected by ambient temperature change. Sensor is calibrated for a particular temperature say (TC), but the measured value shows a deviation with a change in temperature. My aim is to find the error in measurement due to change in temperature and subtract it from measured value. For this purpose I measure both level as well temperature.

To observe the behavior w.r.t temperature I fixed the actual level constant and varied temperature for the range of interest and noted down the measured value at different temperature. It follows a linear variation for that level. I repeated the experiment at different levels and I found that the slope of the straight line is different. Slope decreases with an increase in level.

In real application, I will measure both level as well ambient temperature, from which I can calculate the difference in temperature from TC. I need to know what is the error caused by this change in temperature for that particular level. If the slope of above experiments are same then it is a straight forward calculation. But the slope also changes for different levels.

Hope the issue is clear.

What would be a practical solution for this problem?

Praveen K

2013-05-03 04:13:15


I have a point (x,y) whose slope is in between 1 and 5 and y-intercept is between 0 and 100.

That is extremely vague and way too general. I need more to pin down the line.

2013-05-03 03:18:31

I have a problem here with linear equations.

I got a set of straight lines whose slopes vary from 1 to 5 (linearly) and y-intercept vary from 0 to 100.
I have a point (x,y) whose slope is in between 1 and 5 and y-intercept is between 0 and 100. Is there any method to find the equation of line passing through (x,y) with which I can find y-intercept of that line?

Board footer

Powered by FluxBB